FEATURES

•Commercial equivalent to MIL-PRF-16173E (Grades 1 and 2)

TYPICAL APPLICATIONS
•Pipe coating
•Parts storage
•Underbody coating
•Wire rope
•Steel plate
•Machined parts

METALS PROTECTED
•Carbon Steel                  •Stainless Steel
•Copper                                  •Aluminum
•Cast Iron

APPLICATION
VpCI®-368 may be applied by brushing or spraying. A film thickness of at least 2-3 mils (50-70 microns) is recommended for uncovered outdoor storage.
Surface Preparation:
NACE      SSPC          ARS
3 or 4        6 or 7         High B-2

Product Cleanup:
•Use solvents or mineral spirits for cleanup of equipment.
•Solvent, wax strippers, or alkaline cleaners such as VpCI®-414 can be used for clean up of overspray.

TYPICAL PROPERTIES
Appearance                                 Dark brown viscous liquid
Coverage                                        300-330 ft2/gal @ 3 mils(7-8 m²/l @ 75 microns)
Dry Film Time                             12-24 hours
Drying to Touch Time           0.5-3 hours
Film Type                                         Firm, wax-like
Removal Method                    Petroleum solvents
Carrier                                                 Mineral spirits
Shelf Life                                          24 months @ 75°F (24°C)
Non-volatile Content           60-65%
Viscosity                                           2000-5000 cPs
VOC                                                       347 g/l
Density                                               0.91 kg/l
Note: Coating dry time is affected by temperature, air-flow and humidity.

PACKAGING AND STORAGE
VpCI®-368 is available in 5 gallon (19 liter) steel pails, 55 gallon (208 liter) metal drums, totes, and bulk.